Hyundai Elantra: Starting System / Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Engine Electrical System / Starting System / Description and Operation

Description

The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.

When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.

The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.

The contacts close and the starter motor cranks.

In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.

Troubleshooting

Troubleshooting • The battery must be in good condition and fully charged for this troubleshooting. ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Drive Belt Tensioner Repair procedures
Removal and Installation 1. Disconnect the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the drive belt tensioner (A). Tightening torque : center bolt : 29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 lb-ft) fxing bolt : 39.2 ~ 49.0 N.m (4.0 ~ 5.0 kgf.m, 28.9 ~ 36.2 lb-ft ...

Hyundai Elantra AD (2016-2020) Service Manual: Hood Assembly Repair procedures
Replacement • Be careful not to damage the hood and body. • Removing or installing the hood requires an assistant. • When removing the clips, use a clip remover. 1. After loosening the hood hinge (A) mounting bolts, remove ...