Hyundai Elantra: Lighting System / Head Lamps Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Body Electrical System / Lighting System / Head Lamps Description and Operation

HID Head Lamp

Bulb

(1)	Elements Xenon gas : Xenon gas activates the initial reaction for rapid illuminating. Molybdenum electrode: anode arcing Metal halide salts : color composing component

(2)	Lightening principle When Xenon gas and metal halide salt will discharge the molybdenum anode in a capsule, it emits light.

2.	Ignitor Ignitor (A) is an electromagnetic transformer that receives current from ballast and boost voltage to light on the arc light source in any environment.

Ballast

(1)	Ballast (A) delivers an instant high voltage pulse to the ignitor electrode, to initialize discharge in the source.

(2)	Ballast supplies the stable power to the bulb and the ignitor during initialization and normal state of arc.

Head Lamps Components and Components Location

Components [Standard] 1. Head lamp (Low)2. Head lamp (High)3. Turn signal lamp4. Dust cap5. Position lamp6. Side marker [HID] 1. Head lamp (Low - HID)2. Head lamp (High)3. Turn signal lamp ...

Head Lamps Repair procedures

Head Lamp Aiming Instructions [Mechanical Aiming] The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions. ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Seat Belt Buckle Switch (BS) Description and Operation
Description • The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats. • The SRSCM provides two pins to each side, in order to enter the condition of seat belt buckles (BS) of the driver and passenger seats. • The seat belt buckle ...

Hyundai Elantra AD (2016-2020) Service Manual: Start/Stop Button Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash ped lower panel. (Refer to Body - "Crash Ped Lower Panel") 3. Remove the start/stop button (B) after disconnect the connector (A). Installation 1. Install the start/stop button. 2. Install the crash pa ...