Hyundai Elantra: Rear Seat / Rear Seat Back Cover Components and Components Location
| Component Location |
| 1. Rear seat back cover [LH] | 2. Rear seat back cover [RH] |
Rear Seat Assembly Repair procedures
Replacement
[Rear seat cushion assembly]
1.
Loosen the mounting bolts, remove the rear seat cushion assembly (A).
2.
Disconnect the rear seat cushion extension connector (A).
3.
To instal ...
Rear Seat Back Cover Repair procedures
Replacement
[LH]
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape ...
Other information:
Hyundai Elantra AD (2016-2020) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 4~6 miles (7~10 km or about 10 minutes), stop
at a safe location.
2. Connect hose (9) of the compressor directly to the tire valve.
3. Plug the compressor power cord into the vehicle power outlet.
4. Adjust the tire inflation pressure to the recommended tire inf ...
Hyundai Elantra AD (2016-2020) Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
Throttle AngleOutput Voltage (V)TPS 1TPS 2C.T0.54.5W.O.T4.410.59
ETC Motor
1.
Turn the ignition ...
