Hyundai Elantra: Heater / Temperature Control Actuator Specifications
| Specifications |
| Door Position | Voltage (V) | Error Detecting |
| Max. cooling | 0.3 ± 0.15 | Low voltage : 0.1V or less High voltage : 4.9V or more |
| Max. heating | 4.7 ± 0.15 |
Temperature Control Actuator Description and Operation
Description
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the ...
Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the
cool position when c ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
Throttle AngleOutput Voltage (V)TPS 1TPS 2C.T0.54.5W.O.T4.410.59
ETC Motor
1.
Turn the ignition ...
Hyundai Elantra AD (2016-2020) Owners Manual: Seat Belt Restraint System
Seat Belt-Driver's 3-point system with emergency locking retractor
To fasten your seat belt:
Pull the seat belt out of the retractor and insert the metal tab (1) into the
buckle (2). There will be an audible "click" when the tab locks into the buckle.
You should place the lap ...
