Hyundai Elantra: Supervision Cluster / Average fuel economy/ Instant fuel economy

Hyundai Elantra. Average fuel economy/ Instant fuel economy

Average Fuel Economy (1)

Manual reset

To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed.

Automatic reset

To automatically reset the average fuel economy, select between "After Ignition" or "After Refueling" in the User Settings mode in the cluster LCD display.

- After ignition: When the engine has been OFF for 4 hours or longer the average fuel economy will reset automatically.
- After refueling: The average fuel economy will reset automatically after adding 1.6 gallons (6 liters) of fuel or more and after driving speed exceeds 1 mph (1 km/h).

Information

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated.

Instant Fuel Economy (2)

• The instantaneous fuel economy is displayed according to the bar graph in the LCD display while driving.

Supervision Cluster
The trip computer is a microcomputer- controlled driver information system that displays information related to driving. Information Some driving information stored in the trip computer (for examp ...

Accumulated Info display
This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is accumulated starting from the last reset. To reset the deta ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Smart Key Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart Key Code Saving". 3. After selecting "Smart Key Teaching" menu, push "Enter" k ...

Hyundai Elantra AD (2016-2020) Service Manual: Rear Hub - Carrier Repair procedures
Removal [Disc type] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from front hub. Tightening torque : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)     • Be care ...

© 2018-2025 www.helantraad.com