Hyundai Elantra: Brake System / Brake Line Components and Components Location

Master Cylinder Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery. (Refer to Engine Electrical System - "Battery") 3. Remove the ECM (A). 4. Lo ...

Brake Line Repair procedures

Removal 1. Disconnect the negative (-) battery cable. 2. Disconnect the brake fluid level switch connector. 3. Remove the brake fluid from the master cylinder reservior with a syringe. ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Roof Side Molding Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. 1. Using a screwdriver or remover, remove the roof ...

Hyundai Elantra AD (2016-2020) Service Manual: Auto Light Sensor Repair procedures
Inspection Check if the auto light control operates like a timing chart shown below. Tail lamp output and head lamp (Low) output is controlled based on the auto light sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function Switch is turned ON, and the vehicle ...