Hyundai Elantra: Engine Control System / Canister Close Valve (CCV) Schematic Diagrams

Canister Close Valve (CCV) Specifications

Specification ItemSpecificationCoil Resistance (?)19.5 ~ 22.5 [20°C(68°F)] ...

Canister Close Valve (CCV) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Front Door Window Glass Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside weatherstrip (A). 3. Separate the mounting plug hole (A) from the front door module. 4. Lower the glass by operating the power window switch until the glass moun ...

Hyundai Elantra AD (2016-2020) Service Manual: Transaxle Control Module (TCM) Repair procedures
Inspection Transaxle Control Module(TCM) Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. If the problem is found, repair it. Specification: Below 1? 2. TE ...