Hyundai Elantra: Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle connector wiring (A).

3.
After loosening the mounting bolt, remove the front seat belt buckle (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
To intall, reverse the removal procedure.
   
Make sure the connector is plugged in properly.
Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

Rear Seat Belt
...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: AVN(Audio Video Navigation) head unit Components and Components Location
Components Connector Pin Information NoConnector AConnector BConnector C1-Multmedia-CAN (High)Chassis-CAN (Low)2--Chassis-CAN (High)3---4-Steering wheel remote controller-5SPDIF Shield GND--6SPDIF (+)MTS keypad signal-7---8Illumination (+)AUX R input-9-Multimedia jack (GND)- 10-MIC (+)-11-Batt ...

Hyundai Elantra AD (2016-2020) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 4~6 miles (7~10 km or about 10 minutes), stop at a safe location. 2. Connect hose (9) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the recommended tire inf ...

© 2018-2025 www.helantraad.com