Hyundai Elantra: Child Restraint System (CRS) / Installing a Child Restraint System (CRS)

WARNING

Before installing your child restraint system always:

Failure to follow all warnings and instructions could increase the risk of the SERIOUS INJURY or DEATH if an accident occurs.

WARNING

If the vehicle head restraint prevents proper installation of a child seat (as described in the child seat system manual, the head restraint of the respective seating position shall be readjusted or entirely removed.

After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle:

CAUTION

A child restraint in a closed . vehicle can become very hot.To prevent burns, check the seating surface and buckles before placing your child in the child restraint.

Selecting a Child Restraint System (CRS)
When selecting a CRS for your child, always: Make sure the CRS has a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213). Select a child restraint bas ...

Lower Anchors and Tether for Children (LATCH System)
The LATCH system holds a child restraint during driving and in an accident. This system is designed to make installation of the child restraint easier and reduce the possibility of improperly inst ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Limitations of the System
The Forward Collision Avoidance Assist (FCA) system is designed to monitor the vehicle ahead on the roadway through camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking. In certain situations, the camera may not be able to detect the vehi ...

Hyundai Elantra AD (2016-2020) Service Manual: Floor Console Assembly Repair procedures
Replacement [M/T]     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to r ...

© 2018-2025 www.helantraad.com