Hyundai Elantra: Engine Control System / Intake Air Temperature Sensor (IATS) Specifications
| Specification |
| Temperature [°C(°F)] | Resistance (k?) |
| -40(-40) | 40.93 ~ 48.35 |
| -20(-4) | 13.89 ~ 16.03 |
| 0(32) | 5.38 ~ 6.09 |
| 10(50) | 3.48 ~ 3.90 |
| 20(68) | 2.31 ~ 2.57 |
| 40(104) | 1.08 ~ 1.21 |
| 50(122) | 0.76 ~ 0.85 |
| 60(140) | 0.54 ~ 0.62 |
| 80(176) | 0.29 ~ 0.34 |
Intake Air Temperature Sensor (IATS) Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of t ...
Intake Air Temperature Sensor (IATS) Schematic Diagrams
Circuit Diagram
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Heater & A/C Control Unit (Manual) Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box upper cover assembly.
(Refer to Body - "Glove Box Upper Cover Assembly")
3.
Loosen the mounting screws and remove the crash pad center lower cover [LH](A).
4.
After loosening the mounting screws, r ...
Hyundai Elantra AD (2016-2020) Service Manual: Temperature Control Actuator Description and Operation
Description
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the
temperature door by operating the temperature switch. Then the
temperature will be regulated by ...
