Hyundai Elantra: Light Bulbs / Interior Light Bulb Replacement
■ Map lamp
■ Room lamp
■ Luggage room lamp
■ Vanity mirror lamp (if equipped)
1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the "OFF" button is depressed to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior lamp housing notches and snap the lens into place.
NOTICE
Use care not to dirty or damage lens, lens tab, and plastic housings.
License Plate Light Bulb Replacement
1. Remove the cover by pressing it as direction of the arrows.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order. ...
Appearance Care
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: A/C Pressure Transducer Description and Operation
Description
The A/C Pressure Transducer (APT) converts the pressure value
of high pressure line into voltage value after measuring it. By
converted voltage value, engine ECU controls the cooling fan by
operating it high speed or low speed. Engine ECU stops the operation of
the compressor ...
Hyundai Elantra AD (2016-2020) Service Manual: Memory power seat switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the memory power seat switch connector (A).
4.
Remove the memory power switch (A) after disengaging the mounting clips.
Installation
1.
Ins ...
