Hyundai Elantra: SRSCM / Side Impact Sensor (SIS) Description and Operation
| Description |
| • |
Side Impact Sensors (SIS), each installed on the center part
of the right and left front door modules and the right and left center
pillars, detects side impact during collision. |
| • |
The SRSCM uses the signals from SIS during side collision to determine whether and when to deploy the side air bag. |
Side Impact Sensor (SIS) Components and Components Location
Components
1. Front Pressure Side Impact Sensor (P-SIS)2. Front Gravity Side Impact Sensor (G-SIS)
...
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before disconnectin ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the ...
Hyundai Elantra AD (2016-2020) Service Manual: Compressor Description and Operation
Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the engine.
The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.
Variable Swash Plat ...
