Hyundai Elantra: General Information / Special Service Tools
| Special Service Tools |
| Tool (Number and name) | Illustration | Use |
| 09373-27000 Alternator pulley remover wrench |
| Removal and installation of alternator pulley |
| 09964-C1100 SCC reflector |
| Reflector to align the SCC radar |
| 09964-C1200 Calibration beam |
| Laser to detect the center of the vehicle. |
| 09964-C1300 Tripod |
| SCC reflector or vertical / horizontal laser support. |
Specifications
Specification
Ignition System
Ignition Coil
ItemSpecification Primary Coil Resistance (?)0.61 ± 15% [20°C (68°F)]Secondary Coil Resistance (k?)7.5 ± 15% [20°C (68°F)]
Spark Plug
...
Troubleshooting
Troubleshooting
Ignition System
SymptomSuspect AreaRemedyEngine will not start or is hard to start (Cranks OK)Ignition lock switchInspect ignition lock switch, or replace as requiredIgnition c ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Description
Body Control Module (BCM) function
NoItemDescription1Washer Linked Wiper
-
If the washer switch is pressed ON for 0.06~0.2 second with
the vehicle mode in IGN2, the wiper relay is turned ON 0.3±0.1 second
after washer switch ON, and then the wiper relay is turned OFF 0.7Â ...
Hyundai Elantra AD (2016-2020) Service Manual: Filler-Neck Assembly Repair procedures
Removal
1.
Remove the rear-LH wheel, tire, and the inner wheel house.
2.
Disconnect the fuel filter hose (A) and the ventilation hose (B).
3.
Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
4.
Remove the filler-neck assembly from the vehicle after ...
