Hyundai Elantra: General Information / Specifications

Hyundai Elantra AD (2016-2020) Service Manual / Restraint / General Information / Specifications

Specification

Item	Resistance (?)
Driver Airbag (DAB)	1.7 ~ 6.0
Passenger Airbag (PAB)	1.7 ~ 6.0
Knee Airbag (KAB)	1.7 ~ 6.0
Side Airbag (SAB)	1.8 ~ 6.0
Curtain Airbag (CAB)	1.7 ~ 6.0
Seat Belt Pretensioner (BPT)	1.7 ~ 6.0
Emergency Fastening Device (EFD)	1.7 ~ 6.0

Tightening Torques

Item	N.m	kgf.m	lb-ft
Passenger Air Bag	3.9 ~ 5.9	0.4 ~ 0.6	2.9 ~ 4.3
Curtain Air Bag	7.8 ~ 11.8	0.8 ~ 1.2	5.8 ~ 8.7
Side Air Bag	5.9 ~ 7.8	0.6 ~ 0.8	4.3 ~ 5.8
Knee Airbag (KAB)	7.8 ~ 11.8	0.8 ~ 1.2	5.8 ~ 8.7
Seat Belt Retractor Pretensioner	39.2 ~ 53.9	4.0 ~ 5.5	28.9 ~ 39.8
Emergency Fastening Device	39.2 ~ 53.9	4.0 ~ 5.5	28.9 ~ 39.8
Supplemental Restraint System Control Module	7.8 ~ 9.8	0.8 ~ 1.0	5.8 ~ 7.2
Front Impact Sensor	7.8 ~ 9.8	0.8 ~ 1.0	5.8 ~ 7.2
Pressure Side Impact Sensor	2.0 ~ 2.9	0.2 ~ 0.3	1.4 ~ 2.2
Gravity Side Impact Sensor	7.8 ~ 9.8	0.8 ~ 1.0	5.8 ~ 7.2

General Information

General Information The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and d ...

Special Service Tools

Special Service Tools Tool (Number and Name)IllustrationUseDeployment tool0957A-34100AAirbag deployment tool.Use with (0957A-AL140, 0957A-AL150, 0957A-AL160)Dummy0957A-38200Simulator to check the ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Rear Hub - Carrier Repair procedures
Removal [Disc type] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from front hub. Tightening torque : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft) • Be care ...

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Removal • Put on gloves to protect your hands. • Use seat covers to avoid damaging any surfaces. 1. Remove the roof side molding. (Refer to Body Side Moldings - "Roof Side Molding") 2. Remove the package tray trim. (Refer to ...