Hyundai Elantra: Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Schematic Diagrams
| Circuit Diagram |
Transaxle Oil Temperature Sensor Specifications
Specifications
? Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]Resistance (?)MinMax(-40) -40481534530151006(-20) -4.0156141478516443(0) 32.0588756056168(20) 68.02510.62401.92619.3(40) 1 ...
Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal an ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Stop Lamp Switch Repair procedures
Adjustment
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the lower crash pad.
(Refer to Body - "Crash Pad")
3.
Confirm the gap between stop lamp switch and bracket.
Stop lamp clearance (A) : 1.0 ~ 2.0 mm (0.04~ 0.08 in.)
4.
If the gap betw ...
Hyundai Elantra AD (2016-2020) Service Manual: Heater & A/C Control Unit (DATC) Components and Components Location
Components
ConnectorPin NOFunctionConnectorPin NOFunctionA1Battery (+)A21IGN12IGN222ILL+ (TAIL)3ISG B+23Sensor ground REF (+5V)4Mode control actuator (Vent)24C_CAN High5Mode control actuator (Def)25C_CAN Low6Mode control actuator (Feedback)26HTD (Rear defog indicator)7Intake actuator (Fresh)27- ...
