Hyundai Elantra: General Information / Troubleshooting
Hyundai Elantra AD (2016-2020) Service Manual / Emission Control System / General Information / Troubleshooting
| Troubleshooting |
| Symptom | Suspect area |
| Engine will not start or hard to start | Vapor hose damaged or disconnected |
| Engine hard to start | Malfunction of the Purge Control Solenoid Valve |
| Rough idle or engine stalls | Vapor hose damaged or disconnected |
| Malfunction of the PCV valve | |
| Rough idle | Malfunction of the Evaporative Emission Control System |
| Excessive oil consumption | Positive crankcase ventilation line clogged |
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)]
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive ...
Schematic Diagrams
Schematic Diagram
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Door Step Trim Repair procedures
Replacement
[Front door step trim]
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
When removing the in ...
Hyundai Elantra AD (2016-2020) Service Manual: Rear Door Belt Inside Weatherstrip Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).
3.
To intall, reverse the removal procedure.
•
When installing, install it by first contacting the inside part (basis point ...
© 2018-2024 www.helantraad.com
