Hyundai Elantra: Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Hyundai Elantra AD (2016-2020) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Specifications

Shape	Items	Specifications
	Control current(voltage) [mA]	0 ~ 1100
	Supply pressure [kpa (kgf/cm?, psi)]	1569.06 (16, 227.57)
	Control pressure [kpa (kgf/cm?, psi)]	0 ~ 1569.06 (0 ~ 16, 0 ~ 227.57)
	Internal resistance(?)	5.0 ~ 5.6

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description and Operation

Description • Underdrive brake control solenoid valve(UD/B) is attached to the valve body. • This variable force solenoid valve directly controls the hydraulic pressure inside the und ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Components and Components Location

Components Location 1. 26 Brake Control Solenoid Valve (26/B)2. 35R Clutch Control Solenoid Valve (35R/C)3. Underdrive Brake Control Solenoid Valve (UD/B)4. Overdrive Clutch Control Solenoid Valv ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the specification. Specification : Refer to "Specification" ...

Hyundai Elantra AD (2016-2020) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the filling hose (3) directly into the compressor 3. Connect the other end of the filling hose (3) directly into the valve. 4. Plug the compressor power cord into the vehicle power outl ...