Hyundai Elantra: Air Conditioning System / Cluster Ionizer Description and Operation

Description
The cluster ionizer makes disinfection and decomposition of bad smell from the air-conditioner or inflow air. And it cleans the inside air of a vehicle.
When the ignition switch is ON, the ionizer runs "CLEAN" mode and then "ION" mode, switching between both modes.
In the “CLEAN” mode, the cluster ionizer generates negative ions and positive ions to help clean smells from the air.
In the “ION” mode, the cluster ionizer generates negative ions and cleans inside air of a vehicle.

Cluster Ionizer Components and Components Location
Components Location 1. Cluster Ionizer ...

Cluster Ionizer Repair procedures
Inspection 1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. DisplayFail description00Normal51Cluster ion generator fault * For diagnostic procedur ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Curtain Airbag (CAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to Body - "Roof Trim Assembly") 3. Remove the curtain airbag (A) after disconnecting the curtain airbag harness connector (B) and loosening the mounti ...

Hyundai Elantra AD (2016-2020) Service Manual: Water pump Repair procedures
Removal and Installation 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Remove the drive belt. (Refer to Timing System - “Drive Belt”) 3. Remove the water pump pulley (A). Tightening torque: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft) 4. Remove the ...

© 2018-2025 www.helantraad.com