Hyundai Elantra: Engine And Transaxle Assembly / Engine Cover Repair procedures

Hyundai Elantra AD (2016-2020) Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Cover Repair procedures

Removal and Installation

Remove the engine cover (A).

•	To avoid damage, remove the engine cover on room temperature.

•	To avoid damage of the engine cover, do not disengage both front and rear mounting point at the same time.

2.	Install in the reverse order of removal.

Engine And Transaxle Assembly

...

Engine Room Under Cover Repair procedures

Removal and Installation Engine Room Under Cover 1. Remove the engine room under cover (A). Tightening torque: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) 2. Install in the reverse ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Oil Level Gauge & Pipe Repair procedures
Removal and Installation 1. Remove the oil level gauge (A). 2. Install in the reverse order of removal. ...

Hyundai Elantra AD (2016-2020) Service Manual: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check that the ...