Hyundai Elantra: Steering wheel / Heated Steering wheel Components and Components Location

Hyundai Elantra AD (2016-2020) Service Manual / Steering System / Steering wheel / Heated Steering wheel Components and Components Location

Components location (1)
Heated steering wheel switch

1. Heated steering switch

Components location (2)
Heated steering wheel control module (Body control moduel(BCM))

1. Body contorl module

Repair procedures
Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels are placed in the straight ahead po ...

Heated Steering wheel Description and Operation
Description For the convenience of drivers during the winter, exothermic paint is applied to the surface of the steering wheel to generate heat when it is gripped. Heated control unit (Body co ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Main Crash Pad Assembly Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove int ...

Hyundai Elantra AD (2016-2020) Service Manual: Purge Control Solenoid Valve (PCSV) Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PC ...

© 2018-2025 www.helantraad.com