Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the driver seat assembly.
(Refer to Body - "Front Seat Assembly") |
3. |
Loosening the IMS unit mounting screws. |
4. |
Disconnect the IMS module connectors (B) and then remove the IMS unit (A). |
Installation |
1. |
Install the memory power seat unit. |
2. |
Install the driver seat assembly. |
3. |
Connect the negative (-) battery terminal. |
Hyundai Elantra AD (2016-2020) Owners Manual: Driving in Flooded Areas, Highway Driving
Driving in Flooded Areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake performance may be reduced.
After driving through water, dry the brakes by ge ...
Hyundai Elantra AD (2016-2020) Service Manual: Front Driveshaft Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
•
Be careful not to dam ...