Hyundai Elantra: Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams

Hyundai Elantra AD (2016-2020) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams

Circuit Diagram

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Components and Components Location
Components Location 1. 26 Brake Control Solenoid Valve (26/B)2. 35R Clutch Control Solenoid Valve (35R/C)3. Underdrive Brake Control Solenoid Valve (UD/B)4. Overdrive Clutch Control Solenoid Valv ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: If the Engine Will not Start
If the Engine Doesn't Turn Over or Turns Over Slowly Be sure the shift lever is in N (Neutral) or P (Park). The engine starts only when the shift lever is in N (Neutral) or P (Park). Check the battery connections to be sure they are clean and tight. Turn on the interior light. If the ...

Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylinder block is applied as pressure to the piez ...

© 2018-2025 www.helantraad.com