Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly") |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear door window switch.
(Refer to Power Windows - "Power Window Switch") |
Installation |
1. |
Install the floor consol assembly. |
2. |
Connect the negative (-) battery terminal. |
1. |
Install the rear door window switch. |
2. |
Connect the negative (-) battery terminal. |
Hyundai Elantra AD (2016-2020) Service Manual: Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (A) on the bottom of the condenser with a L wrench.
Tightening torque :
9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
3.
Remove the receiver-drier (A) from condenser using a long
nose plier. Check for crumbled recei ...
Hyundai Elantra AD (2016-2020) Owners Manual: In Case of an Emergency While Driving
If the Engine Stalls While Driving
Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place.
Turn on your hazard warning flasher.
Try to start the engine again. If your vehicle will not start, contact an
authorized HYUNDAI dealer or seek other ...