Hyundai Elantra: Smart Key System / Smart Key Unit Repair procedures

Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box.
(Refer to Body - "Glove Box Upper Cover Assembly")
3.
Remove the smart key unit (A) after disconnecting the connectors (B) and loosening the bolt and nut.

Interior 1 Antenna
   
Take care not to scratch the crash pad and related parts.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Remove the interior 1 antenna (B) after loosening the mounting nuts and disconnect the connector (A).

Interior 2 Antenna
1.
Disconnect the negative (-) battery terminal.
2.
Remove the console upper cover
(Refer to Body - "Floor Console Assembly")
3.
Remove the interior 2 antenna (B) after loosening the mounting nuts (2EA) and disconnecting the connector (A).

Trunk Antenna
1.
Disconnect the negative (-) battery terminal
2.
Remove the rear transverse trim.
(Refer to Body - "Trunk Trim")
3.
Remove the trunk antenna (B) after disconnect the connector (A) and loosening the mounting nuts.

Rear Bumper Antenna
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
3.
Remove the rear bumper antenna (B) after disconnect the connector (A) and loosening the mounting nuts.

Buzzer
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front left wheel guide.
(Refer to Body - "Front Wheel Guard")
3.
Remove the buzzer (B) after disconnect the connector (A)

Door Outside Handle
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front outside door handle.
(Refer to Body - "Front Door Outside Handle")

Inspection
Smart Key Unit
(Refer to Smart Key System - "Smart Key Diagnostic")
Smart Key Switch
(Refer to Smart Key System - "Smart Key Diagnostic")
Antenna
(Refer to Smart Key System - "Smart Key Diagnostic")
Door Outside Handle
1.
Disconnect the front door outside handle connector (A).

2.
Check for continuity between terminals No 3 and No 6.

No
Description
1
Door antenna (+)
2
Pocket lamp LED (+)
3
Door lock/unlock button switch
4
Door antenna (-)
5
Pocket lamp LED (-)
6
Door lock/unlock button switch ground

Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting bolts and connect the connector.
3.
Install the glove box.
4.
Install the negative (-) battery terminal and check the smart key system.
Interior 1 Antenna
1.
Install the interior 1 antenna.
2.
Install the crash pad center panel.
3.
Install the negative (-) battery terminal and check the smart key system.
Interior 2 Antenna
1.
Install the interior 2 antenna.
2.
Install the console rear complete assembly.
3.
Install the negative (-) battery terminal and check the smart key system.
Trunk Antenna
1.
Trunk mounted antenna.
2.
Install the rear transverse trim.
3.
Install the negative (-) battery terminal and check the smart key system.
Rear Bumper Antenna
1.
Install the rear bumper antenna.
2.
Install the rear bumper cover.
3.
Install the negative (-) battery terminal and check the smart key system
Door Outside Handle
1.
Install the outside handle.
2.
Install the front outside door handle.
3.
Install the negative (-) battery terminal and check the smart key system.
Smart Key Unit Schematic Diagrams
Circuit Diagram ...

Smart Key Diagnostic Repair procedures
Inspection Self Diagnosis with Scan Tool It will be able to diagnose defects of SMART KEY system with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control switch located on the overhead console. The sunroof can only be opened, closed, or tilted when the ignition switch is in the ON position. Information In cold and wet climates, the sunr ...

Hyundai Elantra AD (2016-2020) Service Manual: AUX jack Description and Operation
Description The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3 etc., through the vehicle's sound system when it is linked to this jack. The customer has this added option. In case of distortions from media conn ...

© 2018-2025 www.helantraad.com