Hyundai Elantra: General Information / Specifications
Hyundai Elantra AD (2016-2020) Service Manual / Suspension System / General Information / Specifications
| Specifications |
Front Suspension
| Item | Specification | |
| Suspension type | Mac Pherson Strut | |
| Shock absorber | Type | Advanced Valve(RS Valve) |
Rear Suspension
| Item | Specification | |
| Suspension type | Torsion Beam Axle | |
| Shock absorber | Type | Advanced Valve(RS Valve) |
Wheel & Tire
| Item | Specification | |
| Wheel | Aluminum | 6.0J * 15 |
| 6.5J * 16 | ||
| 7.0J * 17 | ||
| 7.5J * 18 | ||
| Steel | 6.0J * 15 | |
| Tire | 195/65 R15 | |
| 205/55 R16 | ||
| 225/45 R17 | ||
| 225/40 R18 | ||
| Spare tire | TMK (tire mobility kit) | |
| T125/80 D15 | ||
| T125/80 D16 | ||
| Tire pressure kPa (psi) | 195/65 R15 | 230 (33) |
| 205/55 R16 | 230 (33) | |
| 215/45 R17 | 230 (33) | |
| 225/40 R18 | 230 (33) | |
| T125/80 D15 | 420 (60) | |
| T125/80 D16 | 420 (60) | |
Wheel Alignment
| Item | Specification | ||
| Front | Toe-in | Total | 0.1° ± 0.2° |
| Individual | 0.05° ± 0.1° | ||
| Camber angle | -0.55 ± 0.5° | ||
| Caster angle | 4.5° ± 0.5° | ||
| King-pin angle | 14.0° ± 0.5° | ||
| Ride Height | 367 ± 10 mm (14.4488 ± 0.3937) | ||
| Rear | Toe-in | Total | 0.34° ± 0.3° |
| Individual | 0.17° ± 0.15° | ||
| Camber angle | -1.2° ± 0.5° | ||
| Ride Height | 364 ± 10 mm (14.3307 ± 0.3937) | ||
Tightening Torques
Front Suspension
| Item | Tightening torque (kgf.m) | ||
| N.m | kgf.m | lb-ft | |
| Hub nuts | 107.9 ~ 127.5 | 11.0 ~ 13.0 | 79.6 ~ 94.0 |
| Lower arm to sub frame (Front) | 117.7 ~ 137.3 | 12.0 ~ 14.0 | 86.8 ~ 101.3 |
| Lower arm to sub frame (Rear) | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
| Lower arm to knuckle | 58.8 ~ 70.6 | 6.0 ~ 7.2 | 43.4 ~ 52.1 |
| Tie rod end castle nut | 24.5 ~ 34.3 | 2.5 ~ 3.5 | 18.1 ~ 25.3 |
| Steering gear box to sub frame | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Stabilizer bar to stabilizer link | 98.1 ~ 117.7 | 10.0 ~ 12.0 | 72.3 ~ 86.8 |
| Stabilizer bar to sub frame | 44.1 ~ 53.9 | 4.5 ~ 5.5 | 32.5 ~ 39.8 |
| Stabilizer bar to front strut assembly | 98.1 ~ 117.7 | 10.0 ~ 12.0 | 72.3 ~ 86.8 |
| Front strut assembly to front axle | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
| Sub frame mounting bolt & nut | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
| Sub frame stay bolt | 44.1 ~ 53.9 | 4.5 ~ 5.5 | 32.5 ~ 39.8 |
| Bolt connecting universal joint to pinion | 32.4 ~ 38.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 |
| Roll rod bracket to roll rod support bracket fixing bolt & nut | 107.9 ~ 127.5 | 11.0 ~ 13.0 | 79.6 ~ 94.0 |
Rear Suspension
| Item | Tightening torque (kgf.m) | ||
| N.m | kgf.m | lb-ft | |
| Hub nuts | 107.9 ~ 127.5 | 11.0 ~ 13.0 | 79.6 ~ 94.0 |
| Shock absorber to body | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| Shock absorber to torsion beam axle | 98.1 ~ 117.7 | 10.0 ~ 12.0 | 72.3 ~ 86.8 |
| Torsion beam axle to frame | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
| Bitmap Torsion beam axle to brake caliper | 63.7 ~ 73.5 | 6.5 ~ 7.5 | 47.0 ~ 54.2 |
Special Service Tools
Special Service Tools
Tool (Number and Name)IllustrationUse09546-26000Strut spring compressorCompression of coli spring09568-1S100Saperate the ball joint from the front alxe09546-3X100 Shock abso ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Troubleshooting
Troubleshooting
SymptomSuspect areaEngine will not start or hard to startVapor hose damaged or disconnectedEngine hard to startMalfunction of the Purge Control Solenoid ValveRough idle or engine stallsVapor hose damaged or disconnectedMalfunction of the PCV valveRough idleMalfunction of the Eva ...
Hyundai Elantra AD (2016-2020) Service Manual: Front Seat Frame Assembly Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
Use a plastic panel removal tool to remove int ...
© 2018-2024 www.helantraad.com
