Hyundai Elantra: BCM (Body Control Module) / Specifications
| Specifications |
| Items | Specifications |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F ~ 167°F (-30°C ~ 75°C) |
| Dark current | SMK : 3mA / Keyless : 4mA |
Components and Components Location
Components
NoConnector AConnector BConnector CConnector D1Batt (+)IGNRain sensor (LIN)Airbag unit (LIN)2IGN 1Front wiper switch (High)-RPAS (LIN)3IGN 2Light switch-Puddle lamp4B ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: SS-A Solenoid Valve(ON/OFF) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the ...
Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end
of the PCV valve and make sure that intake manifold vacuum can be felt.
...
