Hyundai Elantra: Engine Mechanical System / Timing System
- Components and Components Location
- Drive Belt Repair procedures
- Idler Repair procedures
- Drive Belt Tensioner Components and Components Location
- Drive Belt Tensioner Repair procedures
- Crankshaft Damper Pulley Components and Components Location
- Crankshaft Damper Pulley Repair procedures
- Front Oil Seal Components and Components Location
- Front Oil Seal Repair procedures
- Timing Chain Cover Components and Components Location
- Timing Chain Cover Repair procedures
- Timing Chain Components and Components Location
- Timing Chain Repair procedures
Engine And Transaxle Assembly Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
...
Components and Components Location
Components
1. Intake camshaft2. Exhaust camshaft3. Intake CVVT assembly4. Exhaust CVVT assembly5. Timing chain6. Timing chain tensioner arm7. Timing chain tensioner8. Timing chain guide9. Timing ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Cruise Control Switch Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the steering wheel assembly.
3.
Remove the screws from the steering back cover (A).
4.
Remove the steering remote control connector (A).
5.
Remove the steering remote control (A) af ...
Hyundai Elantra AD (2016-2020) Service Manual: Idler Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the idler (A).
Tightening torque :
39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft)
3.
Install in the reverse order of removal.
Inspection
Check the idler for excessive oil le ...
