Hyundai Elantra: Suspension System / Tires/Wheels

Rear Torsion Beam Axle Repair procedures
Removal [Disc type] 1. Loosen the wheel nuts slightly. 2. Raise the vehicle, and make sure it is securely supported. 3. Remove the rear wheel and tire (A) from front hub. Tightening ...

Tire Repair procedures
Tire Wear 1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.063 in) 2. If the remaining tread depth (A) is less than the limit, replace the tire.     ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: ATF Warmer Repair procedures
Removal 1. Remove the under cover. (Refer to Engine Mechanical System - "Engine room under cover") 2. Loosen the drain plug and drain the engine coolant. (Refer to Cooling System - "Coolant") 3. Disconnect the cooling hose (A) after separated the clamp. 4. Disconnect the hose (A ...

Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). 3. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") 4. Remove the installation bolt (A), and then remove the sens ...

© 2018-2025 www.helantraad.com