Hyundai Elantra: Front Seat Belt / Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, remove the height adjust (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
To intall, reverse the removal procedure.
   
Replace any damaged clips (or pin-type retainers).
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Washer Fluid
Checking the Washer Fluid Level Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing. WARNING To prevent seri ...

Hyundai Elantra AD (2016-2020) Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a scan tool. Specification : Refer to "Waveform" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) and remove the sensor af ...

© 2018-2024 www.helantraad.com